Setup on the second computer (2)
3. In "The wizard found disconnected network hardware", check
"Ignore disconnected network hardware" and click Next. But if your Ethernet card that is used for
the direct connection is on the list of disconnected network
hardware, then you must check again whether you are using the
correct
crossover cable and whether the cable has been connected firmly to both computers' RJ-45 ports. If
the crossover cable and its connection are OK, click Next.
4. In "Do you want to use the shared connection?", choose "Yes,
use the existing shared connection for this computer's Internet
access" because Windows has found a shared Internet connection
on the first computer as
the result of setup on the first computer.
5. In "Your computer has multiple connections.", select "Let me
choose the connection to my network". This only appears if you
have more than one network adapters installed in your computer.
6. In "Select the connections to bridge", choose the Local Area
Connection that corresponds to the Ethernet card that is connected
to the first computer. Click Next.
|
