How to create a direct connection using Ethernet crossover cable in Windows XP?

Internet Connection Sharing (ICS) setup (part 2)

9. After Internet connection sharing (ICS) was enabled on the host computer, the ICS host changes its IP address from an APIPA address to this private IP address 192.168.0.1 as the gateway to the Internet and the ICS client is assigned another IP address (with the same subnet mask) by the DHCP server in the ICS host, i.e. 192.168.0.x where x is any decimal number from 1 to 254. Now, every time the ICS host goes online, the ICS client is connected to the Internet via the ICS host.

Local Area Connection details on the ICS host

Figure: Private gateway IP address 192.168.0.1 and subnet mask 255.255.255.0 for the ICS host.

Local Area Connection details on the ICS client

Figure: Private IP address 192.168.0.x (1-254) and subnet mask 255.255.255.0 for the ICS client.

If one of your Ethernet adapters still use an APIPA IP address (i.e. 169.2544.x.y), you are not ready for sharing an Internet connection. Find the solution in the following page.

 
Back Next